KMB JET28 (Rev. 3) including steering nozzle (round, polyurethne)

€55.90 *
Content: 1 material kit

Prices incl. VAT plus shipping costs. Select country of delivery in "Edit shopping cart".

in stock

  • JET2805
Scope of delivery: 1x KMB JET28 (Rev. 3) thrust unit including round steering nozzle made... more
Product information "KMB JET28 (Rev. 3) including steering nozzle (round, polyurethne)"

Scope of delivery:

  • 1x KMB JET28 (Rev. 3) thrust unit including round steering nozzle made from polyurethane without thrust reversal function
  • 1x KMB JET2805 screws set

RC jetboat drive for electric motors - up to 20000 RPM - up to approx.800 W - operational rpm range from  8000 to 20000 RPM - for custom-made RC model boats like Yachts, race  and sport boats as well as civil, research and military model vessels with approx. 50 to 150 cm length and 1,5 to 4 Kg weight ready to run per installed KMB JET28 unit.

Material kit: Includes unmounted / unassembled parts. For installing, works like grinding, glueing and drilling are required. Working materials not included

Features of the KMB JET28

  • preassembled and ready to install JET28 (Rev. 3) suction tunnel, including impeller and motor shaft coupling (for motor shafts Ø 5 mm)
  • solid, one-piece suction tunnel casing made from fibreglass reinforced ABS-injection
  • Ø 4 mm impeller shaft, impeller side notched, motor side leveled, impeller overmolded
  • motor side ball bearing and axial nylon bearing washer
  • impeller side sinter bronce bearing, axial steel and nylon bearing washer
  • grease-filled, refillable Steven tube
  • integrated motor mount incl. material (M4 threaded bolts and hexagon nuts) for mounting a motor or an adaptor flange)
  • Motor connection dimensions for motors or adaptors with 29 mm hole spacing and M4-threads (e.g. brushed 700-motor, MH11 or MH12)
  • KMB high load shaft coupling Ø 4 mm (drive shaft) / Ø 5 mm (motor shaft), pre-mounted
  • Direct mounting of motors with shaft lengths between 17 and 21 mm from connection surface possible
    - For using adaptor flanges (e.g. MH11 / MH12), the length of the adaptor flange needs to be added to the required motor shaft lengths mentioned above
    - By adding additional axial nylon bearing washers between the coupling and the ball bearing (underpinned Offsetting of the coupling), the required minimum shaft length can be reduced to 14 mm (+ adaptor flange length).
  • Round steering nozzle without thrust reversal function, made from polyurethane cast resin
  • Steering nozzle splash guard made from ABS
  • The servo should have around 4,5 to 6,5 kgcm actuating power per connected JET28 steering system.

Further information:

Recommended motorisation (brushless, requires adaptor)

  • up to 10.000 rpm: Motors supporting a continuous power >= 200 Watt
    Cells (LiPoly) and motor-KV; rough current estimation for full throttle
    • 3S: KV <= 900; I ~ 18 A
    • 4S: KV <= 675; I ~ 13,5 A
    • 5S: KV <= 540; I ~ 11 A
  • up to 20.000 rpm (allowed maximum for JET28): Motors supporting a continuous power >= 800 Watt
    Cells (LiPoly) ans motor-KV; rough current estimation for full throttle
    • 3S: KV <= 1800; I ~ 75 A
    • 4S: KV <= 1350; I ~ 55 A
    • 5S: KV <= 1080; I ~ 44 A

Recommended motorisation (brush motors)

  • 700-class-Neodym-motors (up to 1650 rpm/volt) with 3S- to 4S-LiPoly
  • 800-class--motors (up to 1250 rpm/volt) with 3S- to 5S-LiPoly
allowed maximum operating speed (rpm): 20000
required power for maximum operatiing speed in single use (approx., Watt): 800
Static thrust: 12.000 rpm: approx 25 N, 16.000 rpm: approx. 35 N
width (mm): 42
height (mm): 56
length (JET28 suction tunnel, mm): 130
width (JET28 suction tunnel, mm): 38
height (JET28 suction tunnel, mm): 46
wall thickness (JET28 suction tunnel, mm): 1,9
Ø (impeller casing, mm): 28
Ø (impeller, mm): 27
Ø (impeller shaft, mm): 4
materlial: fibreglass-reinforced ABS
Related links to "KMB JET28 (Rev. 3) including steering nozzle (round, polyurethne)"
Hint!
Adaptor flange for (brushless) motors with 25 mm or 30 mm mount hole spacing Adaptor flange for (brushless) motors with 25...
Content 1 packaging unit
€13.50 *
KMB JET28 flange ring KMB JET28 flange ring
Content 1 piece(s)
€1.95 *
KMB JET28 (Rev. 3) including KaMeWa-like steering and thrust reversal KMB JET28 (Rev. 3) including KaMeWa-like...
Content 1 material kit
€57.90 *
KMB JET28 shaft with impeller and washers KMB JET28 shaft with impeller and washers
Content 1 packaging unit
€9.50 *
KMB JET28 stator for exhaust nozzle KMB JET28 stator for exhaust nozzle
Content 1 piece(s)
€2.85 *
KMB JET28 axial bearing washer spare set for the drive shaft (6 parts) KMB JET28 axial bearing washer spare set for...
Content 1 packaging unit
€2.50 *
Cooling water outlet Cooling water outlet
Content 1 packaging unit
€3.80 *
Silicone hose Ø 4 mm / Ø 7 mm, running metet Silicone hose Ø 4 mm / Ø 7 mm, running metet
Content 1 running meter(s)
From €2.70 *
8-cylinder motor dummy 8-cylinder motor dummy
Content 1 material kit
€12.50 *
Universal servo bracket Universal servo bracket
Content 1 piece(s)
€4.75 *
KMB JET28 KaMeWa-like steering and thrust reversal system KMB JET28 KaMeWa-like steering and thrust...
Content 1 material kit
€21.00 *
Drill set for KMB JET28 and servo linkage kits Drill set for KMB JET28 and servo linkage kits
Content 1 packaging unit
€3.99 *
Syringe, 100 ccm with silicone hose Syringe, 100 ccm with silicone hose
Content 1 packaging unit
€6.50 *
Jetsprint Splash - Hull and cockpit cover Jetsprint Splash - Hull and cockpit cover
Content 1 piece(s)
€119.00 *
KMB JET28 ball bearing KMB JET28 ball bearing
Content 1 piece(s)
€3.25 *
KMB JET28 (Rev. 3) thruster unit KMB JET28 (Rev. 3) thruster unit
Content 1 material kit
€47.90 *
Viewed